Vapor Accessory: Replacement Vapor Computer
$59.95
7500-R
Replacement Vapor Computer. This kit contains one replacement computer only, sensors and other items not included.

Vapor/Vector Accessory: Plastic Handlebar Mounting Hardware Kit
$14.95
7000-1000
Hardware for mounting Vapor and Vector speedometers to handlebars. Mount a Trail Tech digital motorcycle/ATV speedometer or tachometer to 7/8" through 1-1/8" bars. Mounts are included with all Trail Tech digital gauge kits and feature a lockable adjustable viewing angle. Vapor or Vector speedometer/tachometer sold separately.

Vapor/Vector Accessory: Power or Tach Sensor
$7.95
7000-1003
Kit contains one sensor wire, used for either Vapor tachometer connection or Vapor/Vector power. 48", 1.2m.

Power wire for Vapor and Vector computers. White connector snaps into mating connector on computer. Red and black leads are wired into vehicle electrical system (polarity independent.) Computers operate in the range of 6.0-400 VAC/VDC, but will not draw enough power to drain a vehicle battery.

Tachometer connection for Vapor. Installation is easy. White connector snaps into mating connector on computer. Black lead is wired to frame ground. Red lead is wrapped around spark plug wire (5 times) or spliced into vehicle coil connector.

Vapor/Vector Accessory: Power and Tach Sensors Kit
$14.95
7000-1001
Kit contains two identical sensor wires, used for Vapor tachometer connection and Vapor/Vector power. 48", 1.2m.

Power wire for Vapor and Vector computers. White connector snaps into mating connector on computer. Red and black leads are wired into vehicle electrical system (polarity independent.) Computers operate in the range of 6.0-400 VAC/VDC, but will not draw enough power to drain a vehicle battery.

Tachometer connection for Vapor. Installation is easy. White connector snaps into mating connector on computer. Black lead is wired to frame ground. Red lead is wrapped around spark plug wire (5 times) or spliced into vehicle coil connector.

Vapor Accessory: Power and Tach Sensors Kit for Raptor 700 and KFX450
$14.95
7000-1020
Kit contains two sensor wires, one used for Vapor tachometer connection on Raptor 700 and KFX450, and another for Vapor/Vector power. 48", 1.2m.

Power wire for Vapor and Vector computers. White connector snaps into mating connector on computer. Red and black leads are wired into vehicle electrical system (polarity independent.) Computers operate in the range of 6.0-400 VAC/VDC, but will not draw enough power to drain a vehicle battery.

Tachometer connection for Vapor on Raptor 700 and KFX450. Installation is easy. White connector snaps into mating connector on computer. Black lead is wired to frame ground. Red lead is wrapped around spark plug wire (5 times) or spliced into vehicle coil connector. Integrated resistor resolves electrical requirements for Raptor 700 and KFX450.

Vapor/Vector Accessory: 16-25 Hose Clamp for Radiator Insert Sensors
$0.75
V300-hose clamp
16-25 Hose Clamp. Used in installation of Vapor/Vector 3/4" radiator hose fluid temperature sensors.

Vapor/Vector Accessory: 20-32 Hose Clamp for Radiator Insert Sensors
$0.75
V300-hose clamp-02
20-32 Hose Clamp. Used in installation of Vapor/Vector 1" radiator hose fluid temperature sensors.