An incredible 1850 Lumens of forward lighting. Designed to project into the night!
Only 13 ounces
Cool 5600K color temperature
Discrete 2.5 inch diameter housing
The light can be easily swapped between the helmet, included handlebar mount (included) or flat surface mount
The system can be run off a portable battery, or vehicle power

Helmet Light Kits Include:

HID Light(s)
Helmet and swivel handlebar clamp (040-HBPK-01)
Quick disconnect battery connector to wire direct to vehicle battery (040-WH5)
LED's in the power switch switch report battery voltage levels
11.1V 6600mAh Li-Ion battery (6600-LI)
Smart Lithium ion battery charger (7800-C)
Soft case (040-HID-04)

Li-Ion Battery Packs

Power one SCMR16 for 2.5 hours
4 hours to charge

Helmet Light Kits: SCMR16 with Li-Ion battery and charger

SCMR16 helmet lights. Accepts 12-30 volts. Draws 30 watts per light. 13 ounces. 95x63x115mm. 5600K. 2400 foot candles. 26000 Lux. Choose between Spot:12° or Flood:38° beam angle and black or silver finish.

These kits include a Trail Tech Li-Ion battery and charger. 6600 mAh. 4 hour charge time. Powers SCMR16 light for 2.5 hours before recharging. 18 oz.

4222-SX-LB 4222-FX-LB 4221-SX-LB 4221-FX-LB

Helmet Light Kits: SCMR16

SCMR16 helmet lights. Choose between spot or flood and black or silver. These kits include a connector for wiring into vehicle power.

4222-SX 4222-FX 4221-SX 4221-FX

Electrical: 11.1V 6600 mAh Li-Ion Battery for Helmet Lights w/Charger
$154.95
6600-LIC
Trail Tech Li-Ion battery pack and charger for Trail Tech helmet lights. Li-Ion weigh less, are smaller and run longer than other battery types. Battery weighs only 18 oz. 6600 mAh. 11.1V. Use clip on back to attach to belt or armor.

Charger uses standard style wall plug. Input: AC 100~240V 50/60Hz. Output: DC 12.6V 2.0A cc/cv. USE ONLY WITH TRAIL TECH LI-ION BATTERY. For indoor use only.

Li-Ion battery powers one SCMR16 for 2.5 hours, one 35mm LED for 6, 12 or 24 hours, or two 35mm LEDs for 3, 6 or 12 hours. 4 hour recharge time.

Light Parts: Helmet Light Mount Expansion Kit
$14.95
040-HBPK-02
Helmet light mount expansion kit. This kit allows mounting of helmet lights to additional handlebars and helmets. Handlebar mount fits any bar size for 7/8" through 1-1/8" and 1-1/4". Handlebar mount pivots 30° in either direction for precise aiming and flexible mounting options. Already included in all new helmet light kits.

Light Parts: 3 Piece Mounting Kit
$24.95
A180-PK01
This mounting kit contains three mounts: handlebar, flat surface, and helmet. Handlebar mount fits 7/8" - 1-1/8" bars. Flat surface and helmet mounts attached with VHB adhesive.

Compatible with all HID and LED helmet lights, handlebar lights, and flat surface lights (not compatible with lights that have solid-mount posts or frame clamps.)